This tester is used to measure the Inclination Angle(Static Friction Coefficient) when the test specimen of enabled wire starts sliding.
Fix 2 specimens parallel to one another onto the Sled and Inclination Board.Put the tension to 2 specimens on the board. Set the Sled on the Board, making each specimen get crossed when the Angle is 0°. Measure the Angle when the Mass starts sliding while the Board gets inclining at a certain speed. Static Friction Coefficient will be calculation as tanθ from the measured Angle.

 

Inclination angle

0 to 90° (Scale 0.2°)

Inclination speed

0.5°/s

Option

Changeable Inclination Speed Spec

Power source

AC 100 V, 1-Phase, 3 A, 50/60 Hz (Motorized)

Dimensions/Weight

W750 × D350 × H425 mm/ 29 kg