เครื่องทดสอบการกระแทกของพลาสติกชนิดค้อนเหวี่ยงที่อุณหภูมิต่ำ รุ่น 258-L (Pendulum Impact Tester with Refrigerator No.258-L)
ราคา: |
฿0
|
No.258-L PENDULUM IMPACT TESTER WITH REFRIGERATOR UNIT
JIS-K7110, K7111, ASTM-D256, D6110, ISO-179-1:2010 and ISO-180 |
This tester enables the operator to conduct the Charpy and Izod impact tests in a low temperature condition. The low temperature chamber is double-doored and the inner door is equipped with working gloves so that the temperature inside the chamber is kept constant while the operator is attaching the test specimen. |
Temperature range |
-50ºC to 60ºC (Refrigerator) |
Safety device |
Hammer setting sensor (Interlock system on the upper door), Acrylic safety cover |
Additional specifications |
Refer to the below table |
Option |
Software, Electric hammer release device, Torque adjusment device (Only for Izod) |
Power source |
AC220V, 3-Phases, 30 A, 50/60 Hz |
Dimensions/Weight |
W1,220xD990xH1,660 mm / 350 kg |
Test method |
Charpy Impact Tester |
Izod Impact Tester |
|
Reference standards |
JIS-K7111, ISO-179, ASTM-D6110 |
JIS-K7110, ISO-180, ASTM-D256 |
|
Capacity |
0.5, 1, 2, 4, 5, 7.5, 15, 25 J |
1, 2.75, 5.5, 11, 22 J |
|
Lift-up angle |
150° |
150° |
|
Impact speed (m/s)* |
2.9, 3.8 (3.46) |
3.5 (3.46) |
|
Striking Edge Angle* |
30 ± 1° (45 ± 2°) |
75° (-) |
|
Striking Edge Angle* | R2 ± 0.5 (R3.17 ± 0.12) | R0.8 (R0.79 ± 0.12) | |
Anvil-Edge Distance (mm)* | – | 22 ± 0.2 (22 ± 0.05) | |
Support Length (mm)* | 62 + 0.5 (101.6 ± 0.5) | – | |
Accessories | Specimen setting gauge, Block gauge, Torque wrench (Izod only) | Specimen setting gauge, Block gauge, Torque wrench (Izod only) |
*JIS/ISO Standard Value (ASTM Standard Value) |
tag: เครื่องทดสอบการกระแทกของพลาสติกชนิดค้อนเหวี่ยงที่อุณหภูมิต่ำ, Pendulum Impact Tester with Refrigerator, Low Temperature Pendulum Impact Tester, Low Temperature Izod Impact Tester, Low Temperature Charpy Impact Tester, เครื่องทดสอบพลาสติก, เครื่องทดสอบแรงกระแทก
- ประเภท: เสนอขาย