JIS-K7110, K7111, ASTM-D256, D6110, ISO-179, ISO-180

This is the fully automatic version of the IMPACT TESTER (Charpy and Izod). A maximum of 210 impact tests can be continuously conducted just by setting the test specimen to the preparation cassette and inputting the test conditions in the computer software. The test specimen will automatically come out from the preparation cassette which is located inside the low temperature chamber. The test specimen will be impacted within 5 seconds after it comes out from the preparation cassette.

 

Hammer

Capacity 0.5 to 25 J, Automatic lift-up device, Automatic stop device

Anvil

Automatic specimen setting device, Rejection device for tested specimens

Test specimens

70 pcs x 3 cassetes (Total 210 pcs) *when of W10xT4xL80 mm, Automatic cassete changing device

Software

Windows compatible

Option

Hammer height adjusting device (Only for Charpy), Hammer changing device (3 Capacities), Low temperature chamber, Constant temperature & humidity chamber, Specimen size measuring device, Collect table for tested specimens

Power source

AC220V, 1-Phase, 10 A, 50/60 Hz, Low temperature chamber model AC220V, 3-Phases, 30 A, 50/60 Hz

Air source

0.5 MPa or more

Dimensions/Weight

W1,150xD1,000xH1,950 mm / 350 kg